Nad C 368

With the C 368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. With the optional BluOS® module, the C 368 can connect to your network and be controlled through a smartphone, tablet, or desktop, and connect wirelessly to any other BluOS Enabled device to create a multi-room High Resolution Audio system. You can also instantly connect to the C 368 through Bluetooth, giving you the ability to stream wirelessly from any Bluetooth Enabled device, and if you’re a vinyl fan, you can also add a turntable. Enjoying music has never been so easy. A totally modern approach to amplification, the C 368 is the ultimate amp for any music lover’s system.

Features:

• 80W x 2 Continuous power into 8 or 4 Ohms
• Bluetooth A2DP with aptX supported
• MM Phono input
• Analogue line inputs
• SPDIF coax and optical inputs
• Speaker A, Speaker B
• Stereo or Bridge mode configuration
• Preamp/Subwoofer out
• Headphone amplifier
• MDC Slots for future upgrades
• IR Remote
• Smartphone Control App
• 12V Trigger in/out
• IR in/out
• RS-232 Serial port for control
• Control4, Crestron, RTI, URC, AMX, Savant, Elan certified

Specifications

Line Input, Pre Out

• THD (20Hz-20kHz): <0.005% at 2V out
• Signal/Noise Ratio: >106dB (IHF; A-weighted, ref. 500mV out, unity gain)
• Channel Separation: >80dB (1kHz); >70dB (10kHz)
• Input Impedance (R and C): 22 kilohm + 100pF
• Maximum Input Signal: >4.5Vrms (ref. 0.1% THD)
• Output Impedance: Source Z + 240 Ohm
• Input Sensitivity: 93mV (ref. 500mV out, Volume maximum)
• Frequency Response: ±0.03dB (20Hz-20kHz)
• Maximum voltage output – IHF load: >4.5V (ref. 0.1% THD)
• Tone Controls:
  Treble: ±7.0dB at 20kHz
  Bass: ±7.0dB at 60Hz
  Balance: -10dB

Phono Input, Pre Out

• THD (20Hz-20kHz): <0.01% at 2V out
• Signal to Noise Ratio:
  >84dB (200 Ohm source; A-weighted, ref. 500mV out)
  >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)
• Input Sensitivity: 1.44mV (ref. 500mV out, Volume maximum)
• Frequency Response: ±0.3dB (20Hz-20kHz)
• Maximum Input Signal at 1kHz: >80mVrms (ref. 0.1% THD)

Line Input, Headphone Out

• THD (20Hz-20kHz): <0.005% at 1V out
  Signal/Noise Ratio: >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)
  Frequency Response: ±0.3dB (20Hz-20kHz)
  Channel Separation: >60dB at 1kHz
  Output Impedance: 6 Ohms

General 

• Continuous Output Power into 4 Ohms and 8 Ohms (Stereo): >80W (ref. 20-20kHz at rated THD, both channels driven)
• Continuous Output Power into 8 Ohms (Bridge Mode): 300W (at 20-20kHz at THD 0.03%)
• THD (20Hz-20kHz): <0.03% (250mW to 80W, 8 Ohms and 4 Ohms)
• Signal to Noise Ratio: >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)
• Clipping Power: >95W (at 1kHz 0.1% THD)
• Clipping Power (Bridge Mode): >315W (at 1kHz 0.1% THD)
• IHF Dynamic Power:
  8 Ohms 120W
  4 Ohms 200W
  2 Ohms 250W
• IHF Dynamic Power (Bridge Mode):
  8 Ohms 500W
  4 Ohms 560W
• Peak Output Current: >20A (in 1 Ohm, 1ms)
• Damping Factor: >300 (ref. 8 Ohms, 20Hz and 6.5kHz)
• Frequency Response: ±0.3dB (20Hz-20kHz)
• Channel Separation:
  >75dB (1kHz)
  >70dB (10kHz)
• Input Sensitivity (for 80W in 8 Ohms): Line In: 470mV; Digital In: 21% FS
• Sample Rate: up to 24 bit/192kHz
• Frequency Band: 2.402G-2.480G
• Maximum Transmit Power (dBm): 7dBm ±2dBm

Power Consumption

• at Auto Standby ON and Network Standby OFF: 0.5 Watts*
• at Auto Standby ON and Network Standby ON: 1.2 Watts**
• OFF mode (Power switched OFF): 0.1 Watts